The Series ED Oscillator/Demodulator is designed to simplify installation for 35mm DIN Rail and Panel Mount applications. It provides DC-in/DC-out operation for AC LVDTs and is internally regulated for additional stability of the output signal. Optimized for 3 kHz or 7kHz performance. A variety of voltage outputs are available as well as 4-20 mA; all with zero offset and span adjustment.
| - | (3#KHz Oscillator @ 5.0 +/- .75, Any Output Phase Angle *) | (7KHz Oscillator @ 5.0 +/- .75 VRMS Output Phase >10 Degrees) * | (7KHz Oscillator @ 5.0 +/- .75 VRMS Output Phase <10 Degrees) * | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MODEL # | ED110-03-55S | ED110-03-11S | ED110-03-P1S | ED110-03-N1S | ED110-03-42S | ED210-07-55S | ED210-07-11S | ED210-07-P1S | ED210-07-N1S | ED210-07-42S | ED310-07-55S | ED310-07-11S | ED310-07-P1S | ED310-07-N1S | ED310-07-42S | ||||||||||||||
| INPUT VOLTAGE V DC | 22 TO 30 VDC | ||||||||||||||||||||||||||||
| INPUT CURRENT ma | 100 mA + XDCR | ||||||||||||||||||||||||||||
| Non Linearity % | 0.05% | ||||||||||||||||||||||||||||
| OUTPUT Z Ohms Nominal | 5 Ω | >1G Ω | 5 Ω | >1G Ω | 5 Ω | >1G Ω | |||||||||||||||||||||||
| OUTPUT I +/- ma | 3 | N/A | 3 | N/A | 3 | N/A | |||||||||||||||||||||||
| FREQ RESPONSE -3 dB | 500 Hz | 1000 Hz | |||||||||||||||||||||||||||
| TEMP. OPER. DEG. | +32ºF to +158ºF (0ºC TO 70ºC) | ||||||||||||||||||||||||||||
| TEMP. STORAGE DEG. F | -67ºF to +257ºF (-55ºC TO 125ºC) | ||||||||||||||||||||||||||||
| WIRE TERMINATION | UP TO 14 AWG. | ||||||||||||||||||||||||||||
| ZERO OFFSET ADJ. MIN. | ± .04 VDC | 1.2 mA | ± .04 VDC | 1.2 mA | ± .04 VDC | 1.2 mA | |||||||||||||||||||||||
| OUTPUT RIPPLE MAX. | .015 V RMS | .024 mA RMS | .015 V RMS | .024 mA RMS | .015 V RMS | .024 mA RMS | |||||||||||||||||||||||
| OUTPUT DC ** NOMINAL ADJUSTABLE | ± 5 VDC | ± 10 VDC | 0 TO +10 VDC | 0 TO -10 VDC | 4 TO 20 mA | ± 5 VDC | ± 10 VDC | 0 TO +10 VDC | 0 TO -10 VDC | 4 TO 20 mA | ± 5 VDC | ± 10 VDC | 0 TO +10 VDC | 0 TO -10 VDC | 4 TO 20 mA | ||||||||||||||
| OUTPUT LOAD LIMITS OHMS | 5 Ω TO 400 Ω | 5 Ω TO 400 Ω | 5 Ω TO 400 Ω | ||||||||||||||||||||||||||
* Oscillator output voltage adjusted via span adjustment potentiometer.
* Oscillator output current operates into a 100 ohm load with less than 0.25% Distortion.
** Output voltage and or current determined when using transducer whose sensitivity is 0.500 V/v +/- 10% at both ends of stroke Adjusted via the span control potentiometer.
*** Output temperature coefficient for voltage output din rail series +/- (.01% Of output +/- .00025V/deg.F)
*** Output temperature coefficient for current output din rail series +/- (.008% Of lvdt stroke + .00122Ma)
**** Output polarity, when connected as shown the output voltage will become more positive as the core moves towards the lead end. Polarity may be reversed by interchanging connections to pins # 7 and 9
| SPECIFICATION | VALUE |
|---|---|
| NON-LINEARITY | ≤ ±0.25% FS (Best Fit Straight Line) |
| REFERENCE FREQUENCY | 7.0 KHz |
| SENSITIVITY | 0.50 V/V ±10% at FULL SCALE |
| INPUT VOLTAGE | 20 VRMS, Max. |
| NULL VOLTAGE | < 1.0% Excitation Voltage |
| TEMPERATURE COEFFICIENT | < ±0.001% FS/°F Zero, < ±0.01% Reading/°F Span |
| TEMPERATURE RANGE | Operating: -67°F to +220°F (-55°C to +104°C); Storage: -67°F to +275°F (-55°C to +135°C) |
| MATERIALS | Stainless Steel Housing and Shaft; Aluminum Connector and Adapter |
